skip to Main Content

Metal Buildings

Metal Buildings for Industrial, Commercial and Agricultural

Read More

Metal Buildings Solution

Metal Buildings design from Havit Steel provides an optimized solution for your project. Our professional team is ready to serve any buildings. We can provide you with the most efficient design and construction plan, which is fast and smooth to complete construction for your steel building projects.

Metal Buildings
Steel Barn Building
Steel Barn Building

Steel Barn Building

Steel Barn Building has a variety of purposes on-farm, such as equipment storage or animal shelters. The barn is the…

Steel Shed Building
Steel Shed Building

Steel Shed Building

Steel Shed building is pre-engineered steel structures that can use for storage in a variety of applications, agricultural machinery, or…

Metal Storage Building
Metal Storage Building

Metal Storage Building

The metal storage building is modern solutions for all your storage needs. The strength and durability of the steel structure…

Heavy Steel Workshop
Heavy Steel Workshop

Heavy Steel Workshop

With the development of society and the economy, to meet the increasing scale of production and operation, industrial manufacturing enterprises…

Metal Buildings Specification

The metal buildings uses steel to form a load-bearing structure. Generally, beams, columns, trusses, and other components made of section steel and steel plates constitute a load-bearing structure, which together with roof, wall, and floor, form a building.

Compared with traditional concrete buildings, metal structure buildings use steel plates or section steel instead of reinforced concrete, higher strength, and better seismic resistance. And because the components can be manufactured in factories and installed on-site, the construction period is greatly reduced. Due to the reusability of steel, it can greatly reduce construction waste and become more environmentally friendly. Therefore, it is widely used in industrial buildings and civil buildings all over the world.

1. Greatly save construction time. Construction is not affected by the season
2. Increase the use area of buildings, reduce construction waste and environmental pollution
3. Building materials can be reused, stimulating the development of other new building materials industries
4. Good seismic performance, easy to transform, flexible and convenient in use, bringing comfort and so on
5. High strength, lightweight, high safety and wealth of components, and lower building cost

1. Heat-resistant and non-fire-resistant, fire-resistant coatings are required
2. It is susceptible to corrosion, and the surface needs to be coated with anti-corrosion coatings to reduce or avoid corrosion and increase durability

Metal Buildings

Metal Building Kits

Steel Building Kits design from Havit Steel with advantage of Fast and Simple Construction, Wide Range Of Uses, Reasonable Cost, lower price than concrete building structure.

Metal Buildings Cladding

Metal Cladding System

Metal cladding system includes wall and roof cladding, skylight sheet, trim and flashing, gutter and downspout, insulation, which are essential components of metal building.

Metal Buildings

Steel Building Specs

Steel Building Specification provide the basic information about the Prefab Steel Building, which include Steel Warehouse, Industrial Workshop, Shed, and Garage Building.

We Are Here To Serve Any Type Of Metal Buildings

Please contact us. There’s a lot we can do for your steel building projects, small or large. Our team will provide you with the best quality construction solution


With the increasing application of metal structures in buildings, although it adds intense color to our city, in addition to the aesthetic appearance of prefab metal structure buildings, people also care about their usability and service life. As we all know, the service life of general reinforced concrete structures is about 60 years, and the presence of brick-concrete structures is about 50 years.

How long is the service life of the metal structure buildings?

From the analysis of technical data, the durability of the steel structure is excellent, and it will not be a problem for 100 years. Many steel structures in Europe are nearly 100 years old, such as the Eiffel Tower in France. However, metal structure buildings have a useful life of 50 to 100 years for various reasons.

metal structure buildings

How to extend the service life of metal structure buildings?

Many steel structures professional experts know that the design of steel structure housing is a very rigorous and complicated job. Some details determine the service life of the metal building. These details will certainly extend the life of metal structures.

1. Metal structure building insulation and fire prevention measures:

Metal has the characteristics of high strength, good thermal conductivity, good electrical conductivity, etc. When taking insulation measures, it must pay attention to fire safety. When the temperature of steel is higher than 150 ° C, the toughness decreases. At this temperature, the steel structure house will have severe deformation under its weight, which will cause the instability of the entire steel structure house. Therefore, fire protection measures must take for steel structure buildings.

2. Metal building roof design:

The design of the steel structure building roof should consider the drainage and seepage prevention function of the roof. Therefore, in the design drawing, the roof slope should not be less than 5 degrees, especially where there is a lot of rain and snow. The roof slope of metal buildings should determine according to the local snowfall or rainfall. In case of an emergency, when heavy rain strikes, drainage work should do well, and water should not accumulate or leak. If the flood enters the house, it will directly affect the service life of the house.

steel structure roof

3. Set temperature expansion cracks on both sides of the steel structure buildings.

Expansion joint design of steel structure buildings will change due to the temperature of the natural environment. The temperature of the steel structure building itself will also change as the external environment temperature changes. The temperature change of the steel structure building will cause the deformation of the prefab metal building, which will cause the temperature stress of the steel structure building. The larger the steel structure residential area, the higher the temperature stress. Therefore, to avoid excessive temperature stress, it is necessary to set temperature expansion cracks on both sides of the steel structure buildings.

4. Anti-rust treatment of steel structure buildings:

Because some parts of steel structure buildings inevitably expose to the air, especially in humid environments. It is more likely to cause corrosion of the metal structure. Or steel structures in corrosive gas environments, the corrosion will be more serious. Therefore, it is necessary to pay attention to this point in the use of steel structure buildings and take anti-rust measures. Corrosion of steel could cause huge losses. Only adequate protection can ensure the long life of steel structures. Anti-corrosion coatings are a standard method of protection.

metal structure buildings

5. Fully understand the natural environment

Fully understand the surrounding environment, geological conditions, and climate, such as local rainfall, wind size, wind direction, and whether it is potentially dangerous. It is essential to understand these and to develop a reasonable foundation plan based on the above situation.

6. Never modify without permission

After the installation of the steel structure completed, the owner must not change it without permission, and cannot disassemble or alter the steel structure components. Unauthorized reconstruction may lead to building collapse.

7. Open windows for ventilation

Open windows to ventilate frequently can help the house’s air circulation and keep the house to stay dry and avoid pests.

8. Regular maintenance

During the use of steel structure buildings, they should maintain at regular intervals, which will significantly increase the service life. Under normal circumstances, the corrosion depth of steel structures is 0.4mm every ten years, so we must also pay attention to environmental conditions and maintenance issues.

prefab metal buildings

It believed that if the above points achieved, the service life of steel structure buildings will significantly extend.

Back To Top