skip to Main Content

Metal Buildings

Metal Buildings for Industrial, Commercial and Agricultural

Read More

Metal Buildings Solution

Metal Buildings design from Havit Steel provides an optimized solution for your project. Our professional team is ready to serve any buildings. We can provide you with the most efficient design and construction plan, which is fast and smooth to complete construction for your steel building projects.

Metal Buildings
Steel Barn Building
Steel Barn Building

Steel Barn Building

Steel Barn Building has a variety of purposes on-farm, such as equipment storage or animal shelters. The barn is the…

Steel Shed Building
Steel Shed Building

Steel Shed Building

Steel Shed building is pre-engineered steel structures that can use for storage in a variety of applications, agricultural machinery, or…

Metal Storage Building
Metal Storage Building

Metal Storage Building

The metal storage building is modern solutions for all your storage needs. The strength and durability of the steel structure…

Heavy Steel Workshop
Heavy Steel Workshop

Heavy Steel Workshop

With the development of society and the economy, to meet the increasing scale of production and operation, industrial manufacturing enterprises…

Metal Buildings Specification

The metal buildings uses steel to form a load-bearing structure. Generally, beams, columns, trusses, and other components made of section steel and steel plates constitute a load-bearing structure, which together with roof, wall, and floor, form a building.

Compared with traditional concrete buildings, metal structure buildings use steel plates or section steel instead of reinforced concrete, higher strength, and better seismic resistance. And because the components can be manufactured in factories and installed on-site, the construction period is greatly reduced. Due to the reusability of steel, it can greatly reduce construction waste and become more environmentally friendly. Therefore, it is widely used in industrial buildings and civil buildings all over the world.

1. Greatly save construction time. Construction is not affected by the season
2. Increase the use area of buildings, reduce construction waste and environmental pollution
3. Building materials can be reused, stimulating the development of other new building materials industries
4. Good seismic performance, easy to transform, flexible and convenient in use, bringing comfort and so on
5. High strength, lightweight, high safety and wealth of components, and lower building cost

1. Heat-resistant and non-fire-resistant, fire-resistant coatings are required
2. It is susceptible to corrosion, and the surface needs to be coated with anti-corrosion coatings to reduce or avoid corrosion and increase durability

Metal Buildings

Metal Building Kits

Steel Building Kits design from Havit Steel with advantage of Fast and Simple Construction, Wide Range Of Uses, Reasonable Cost, lower price than concrete building structure.

Metal Buildings Cladding

Metal Cladding System

Metal cladding system includes wall and roof cladding, skylight sheet, trim and flashing, gutter and downspout, insulation, which are essential components of metal building.

Metal Buildings

Steel Building Specs

Steel Building Specification provide the basic information about the Prefab Steel Building, which include Steel Warehouse, Industrial Workshop, Shed, and Garage Building.

We Are Here To Serve Any Type Of Metal Buildings

Please contact us. There’s a lot we can do for your steel building projects, small or large. Our team will provide you with the best quality construction solution


Steel Workshop Building

The steel structure workshop is a building used for industrial production. The industrial workshop includes production workshops, auxiliary production workshops, warehouses, power stations, and buildings for various purposes according to their uses. Compared with traditional concrete buildings, steel structure workshop building use steel plates or section steel instead of reinforced concrete, which has higher strength and better impact resistance.

Steel workshop building used in industrial production and steel structures is painted and then delivered to the installation site. And because the steel structure can be manufactured in the factory and installed on-site, construction time is greatly reduced. Due to the reusability of steel, it can greatly reduce construction waste and is more environmentally friendly. Therefore, it is widely used in industrial buildings and civil buildings.

Description of Steel Workshop Building:

Steel is the most economical, durable, and most widely used building material. Due to the excellent steel performance, the steel workshop building has the advantages of a large span and lightweight.

Steel workshop building design uses high-strength steel, which can withstand the impact of external bad weather and ensure indoor personnel and equipment safety.

The Components of Steel Workshop Building

Main Structure

1. Embedded components (stable the main structure)
It is divided into an embedded bolt connection and a plug-in cup-shaped mouth connection. The common connection method of ordinary steel structure workshop is mainly embedded bolt connection. Including hinge connection and rigid connection.

Foot Bolt Connection
The shape of the embedded bolt is usually “L” and is made of steel rod. The diameter and length are determined according to the design requirements. Usually φ24~φ64mm. The tightening force of a single bolt can reach 300KN.

2. Steel column and beam
The column and roof beams of the steel workshop building are usually H-shaped steel made of section steel and steel plate. Columns and steel beams welded with steel plates need to be corrected after assembly and welding to prevent the H-section steel from deforming due to welding deformation. Steel columns and beams are usually connected by welds or bolts, which are the workshop’s main load-bearing structure.

Steel Workshop Building

Secondary Structure

1. Purlin and wall girt
It uses C or Z-shaped steel, and the section size is determined after force calculation. The distance between the purlin and the wall girt generally does not exceed 1.5 meters.

2. Bracing
There are roof bracing and column cross bracing. It is usually made of round steel, angle steel, or square tube. The bracing system is used to stabilize the steel frame.

3. Sag rod
The sag rod is connected between the purlins to adjust and control the two adjacent purlins’ stability. Generally, the sag rod is made of round steel with a diameter of 12 or 14 mm.

Roof and wall panels

Roof and wall panels are divided into two types: corrugated single sheet and sandwich panels. The single color sheet is usually used for buildings without thermal insulation requirements, relying on purlins or wall girt to form a roof and wall enclosure structure.

Sandwich panels are mainly used in buildings that require heat preservation and heat insulation. The sandwich panel’s core materials mainly include polyphenylene, polyurethane foam, rock wool, and glass wool.

steel workshop building

Load-bearing system of Steel Workshop Building

The main components of steel structure industrial workshop buildings are bracing system, wall, roof panel, frame structure system, roof structure system, etc.

The bracing system is mainly composed of columns and roof bracing. The bracing system’s role is to connect the horizontal and vertical plane frames so that each part becomes a unified overall spatial structure, interconnecting and working together to ensure the stability and rigidity of the steel structure workshop building.

The roof and wall panels are to ensure a normal and safe production environment in the workshop. It forms a wind load that bears and transmits the wall’s weight through the foundation, wall girt, and wind-resistant columns, and the wind load acts on the wall.

The frame structure system is composed of horizontal and vertical plane frames. As the basic load-bearing structure of the steel structure workshop, the horizontal plane frame is significant. It is composed of a foundation, roof beams, and steel columns.

The Advantage of Steel Workshop Building

Advantages of steel structure workshop

1. Easy to assemble
The steel components arriving at the construction site are all prefabricated. During the construction process, the installation work needs to layout each structure and erect it according to the installation drawing.
The installation sequence of the steel workshop building is:
First, install the steel columns and column cross-bracing and install roof beams and roof horizontal bracing. Finally, installs the purlins and enclosure structure.

2. Reasonable cost:
The steel structure workshop building is light in weight, reducing the basic cost, and the construction speed is fast. It can be completed and put into production as soon as possible. The overall economic benefits are much better than that of the concrete structure

3. Simple construction, short construction period.
The production and installation of steel structure usually involve processing all required components in the factory and then transporting to the construction site to assemble. So the construction period is greatly shortened. A 4000 square meter building can be basically installed in only 40 days.

4. Energy-saving and environmentally friendly
The corrugated color steel sheet and sandwich panels used in the prefab steel structure workshop are all energy-saving materials. The steel structure also adopts dry construction during the construction process to avoid dust and environmental pollution caused by concrete construction.

Steel Workshop Building Components
steel workshop buildings

Steel workshop building components

Steel workshop buildings have become a structural system with perfect design, manufacturing, and construction standards. The single-layer steel structure workshop is generally a space system. It composed of the roof structure, steel columns, crane beams, brake beams, bracing, and wall girts. The components of Steel workshop buildings The horizontal frame of Steel Workshop Buildings Consisting of columns, roof trusses or roof beams, and the bracing, which connected with the horizontal frame. It is the primary load-bearing system of single-story steel structure workshops. It bears the structure's weight, wind, snow loads, and vertical and lateral loads of cranes. And transmits these…

Read more
Back To Top